Acro Building Systems 12020, Steel Wall Scaffold Over Plate Hanger for Bracket

Steel Wall Scaffold Over Plate Hanger for Bracket

To be used with 12048

The #12020 Plate Hanger may be used to hook the scaffold bracket over the plate in lieu of using the safety bolt and clip. Install Scaffold Bracket not more than 8 feet apart on a sound stud. Drive nail into stud at bottom of each bracket. Install Safety "J" Bolt and Clip on each Scaffold Bracket. Drill a 5/8" hole on side of stud in line with hole in vertical Bracket member. Insert Safety Bolt through 5/8" hole from inside of building and place "J" Bolt hook around stud. Put Clip on the other end, which laps over vertical member. Securely fasten nut to pull vertical member tightly against outside wall.

Shown below with 12048