Acro Building Systems 12048, Steel Wall Scaffold 48" Scaffold Bracket
Steel Wall Scaffold 48" Scaffold Bracket
Complies with OSHA regulations
• Optional Over the Plate Hanger
• Creates safety perimeters on new construction
• Installs on all 4 sides or use End Fence Guardrail
• 42” Guardrail Posts
• Ideal for truss installation
• Maximum spacing 8’ apart
• Powder coated safety yellow
• Made in America
The easy-to-use 12036 and 12048 scaffold bra
ckets
offer convenience for residential or commercial roofing projects. They
are installed over wall sheathing just below the eave height on one or
all four sides of a structure to create a safe, convenient walkway for
erection of roof trusses, plywood, shingle, fascia, gutters, and
under-eave covering. They include a 3/16" sway brace for right or left
hand use and a 5/8" safety bolt and clip. The #12020 Plate Hanger may be
used to hook the scaffold bracket over the plate in lieu of using the
safety bolt and clip. Install Scaffold Bracket not more than 8 feet
apart on a sound stud. Drive nail into stud at bottom of each bracket.
Install Safety "J" Bolt and Clip on each Scaffold Bracket. Drill a 5/8"
hole on side of stud in line with hole in vertical Bracket member.
Insert Safety Bolt through 5/8" hole from inside of building and place
"J" Bolt hook around stud. Put Clip on the other end, which laps over
vertical member. Securely fasten nut to pull vertical member tightly
against outside wall.
Spec Sheet - Click to View/Print
12036
| 36" Scaffold Bracket |
| 12048 | 48" Scaffold Bracket |
| 12020 | Over Plate Hanger
|
10140
| End Fence Guardrail
|
12054
| Corner Scaffold Bracket
|
12056
| Guardrail Post (12055) & Holder (12022) |
