Click here to view
Man Store Safety Commercial



 check out:
The Man Store Blog







  


Manufacturer Catalogs








  Home > MRO > Tools & Supplies > Adhesives, Sealants, Fasteners & More > MKT Fasteners > MKT Sup-R-Sleeves >

  MKT 5/8" Sup-R-Sleeve Carbon Steel, Zinc Plated
MKT 5/8" Sup-R-Sleeve Carbon Steel, Zinc Plated
MKT 5/8" Sup-R-Sleeve Carbon Steel, Zinc Plated
 


 

Priced 25 / Box, 15 / Box & 10 / Box

Call for Pallet Quantity Pricing


Minimum Order:  $150 on Any Combination of  MKT Products
Per Box $12.51

Item

  

Qty:  
Description Technical Specs Extended Information
 
Item: MKT 5/8" Sup-R-Sleeves Carbon Steel, Zinc Plated

Approvals/Listings
G.S.A Spec FF-S-325C, Group II, Type 3, Class 3
FM 3/8", Hex Head Only
Installation
1.  Select a carbide-tip drill bit with same nominal diameter as anchor body. Drill hole depth ½" to 1" deeper than anchor embedment.  Clean hole of debris.
2.  Set nut flush with top of anchor and drive anchor through material to be anchored into the work surface until nut and washer are snug with material to be attached.
3.  Tighten nut until finger tight, then turn 3 or 4 full turns to set the expansion sleeve.
Concerns
Do not over-torque


Other Available Materials:
- 304 SS on Select Sizes

Other MKT Fasteners - Click to View

Spec Sheet / Installation Sheet - Click to View/Print
Features
  • Length of sleeve makes anchor more forgiving than a wedge anchor and induces less stress on the substrate.
  • Can be used in solid or hollow masonry.
  • Works in a bottomless hole.
  • Required hole diameter equals anchor diameter.
  • Supplied assembled with 4 head styles.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

MRO > Tools & Supplies > Adhesives, Sealants, Fasteners & More > MKT Fasteners > MKT Sup-R-Sleeves