Titebond GREENchoice 5311, 5312 Projects & Repair Construction Adhesives

Ecommerce

Click here to view
Man Store Safety Commercial

check out:
The Man Store Blog

Manufacturer Catalogs

Credit Application

Home > MRO > Tools & Supplies > Adhesives, Sealants, Fasteners & More > Adhesives, Caulks & Sealants > Titebond "GREENchoice" Adhesives >

Titebond GREENchoice 5311, 5312 Projects and Repair Construction Adhesive

Titebond GREENchoice Projects & Repair Construction Adhesive

Titebond GREENchoice Projects and Repair Construction Adhesive

Alternative Views:

Sold 12/Tubes/Case

Minimum Purchase - 2 Cases of any Titebond Product

Call for 1/2 or Full Pallet Pricing

LEED Certified

**View the Links Below

M.S.D.S.
LEED Certification Letter

Pricing per case (As Low as): $33.52

Choose A Size

Size*:

Qty:

Description

Titebond GREENchoice Projects and Repair Construction Adhesive
Available in 2 Sizes

5311 10.5 oz Tube, 12/Case
5312 29 oz Tube, 12/Case

GREENchoice Projects & Repair Construction Adhesive is an interior adhesive designed for general repair and installation projects. The versatile formula has a long working time for precise placement.

GREENchoice Projects & Repair is a VOC-compliant formula containing no ozone-depleting chemicals, making it safer for you and the environment. Unlike solvent-based adhesives, it is nonflammable, emits no harmful fumes and cleans up with water.

Type Blend of polymer emulsions		Calculated VOC (less water): 6.6 g/L
State Medium-viscosity mastic		Weight/gallon 11.93 lbs.
Color Beige		Flashpoint Greater than 200°F.
Solids 75%		Freeze/thaw stability Stable
Viscosity60,000 - 90,000 cps		Storage life More than 1 year in unopened container

Application temperature

40°F. to 100°F.
Service temperatures

10°F. to 120°F.
Method of application

Cartridge/caulking gun
Coverage (maximum)

Approximate length of bead according to bead diameter:

Container	1/8" bead	1/4" bead	3/8" bead

10.5 oz. Cartridge	129 ft.	32 ft.	14 ft.
29 oz. Cartridge	355 ft.	89 ft.	39 ft.

Working time

Approximately 20 minutes for a 1/4" bead
Working surfaces

Surfaces must be clean and free of any material that may deter adhesion. Apply adhesive to only one of the surfaces to be bonded. NOTE: For subfloors, nail or screw each sheet as recommended by the American Plywood Association.
Cleanup

Clean with water while adhesive is wet. Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.