Home > Cut Level > 3
We found 68 results matching your criteria.
Sort By:
Page of 3
West Chester KS993KOA Premium Grain Goatskin Drivers Gloves, Oil Armor Finish, Cut Level 4 Lining, Arc Flash 4 Rated, Pair PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Arc Flash Rated / Cut Level A4

PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair

Ideal for petrochem , construction, demolition, mining, and fabrication.

  • Synthetic leather palm with silicone grip enhances grip in wet and dry applications while providing dexterity
  • Thermo Plastic Rubber (TPR) molded fingers, thumb and back of the hand guards for maximum protection
  • Kevlar® Stitched palm for added durability and gel padding for comfort
  • Synthetic Leather forchettes enhance the natural contour of the glove for a better fit
  • Kevlar® Fabric reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in high-wear areas
  • Hi-Vis Spandex fabric back
  • Glove pull with ID badge on wrist for ease of donning
  • Launderable for extended life and to reduce replacement costs
  • Fully lined with Kevlar® fabric for added heat and cut resistance
  • Water barrier membrane to keep your hands dry
  • EN 388 Results:
    - Abrasion: 3
    - Cut (Coupe Test): 3
    - Tear: 3
    - Puncture: 3
  • Available in sizes: Medium - 2XL

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 Gauge Green High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger
  • Extended wrist
  • Velcro closure for easy on/off and a secure fit
  • ANSI A2 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 3
    - Tear: 4
    - Puncture: 3
  • Available in sizes: Small - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair PIP 10-KS12S Kut-Gard Kevlar Sleeves, Single Ply, 12" Length - Box/6 Pairs PIP 10-KS14S Kut-Gard Kevlar Sleeves, Single Ply, 14" Length - Box/6 Pairs

PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 gauge orange HPPE shell with black micro-surface nitrile padded palm
  • High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger • Extended wrist • Velcro closure for easy on/off and a secure fit
  • ANSI A3 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 4
  • Available in sizes: Medium - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



Part# 10-KS12S Part# 10-KS14S
PIP 10-KS14CL Kut-Gard Kevlar Sleeves, Two Ply, 14" Length, Cotton Inner Ply - Box/6 Pairs PIP 10-KS10 Kut-Gard Kevlar Sleeves, Two Ply, 10" Length - 6 Pairs PIP 10-KS18S Kut-Gard Kevlar Sleeves, Single Ply, 18" Length - Box/6 Pairs
Part# 10-KS14CL Part# 10-KS10 Part# 10-KS18S
PIP 10-KS18STO Kut-Gard Kevlar Sleeves, Single Ply, 18" Length, Thumb Hole - Box/6 Pairs PIP 120-4100 Maximum Safety Reinforced Goatskin Leather Palm Glove with Leather Back, Kevlar Lining and TPR Molded Knuckle Guards - 1 Pair PIP 10-KS10TO Kut-Gard Kevlar Sleeves, Two Ply, 10" Length, Thumb Hole - Box/6 Pairs
Part# 10-KS18STO Part# 120-4100 Part# 10-KS10TO
PIP 10-KS12 Kut-Gard Kevlar Sleeves, Two Ply, 12" Length - Box/6 Pairs PIP 10-KS18CL Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Cotton Inner Ply - Box/6 Pairs PIP 120-4150 Maximum Safety Reinforced Goatskin Leather Palm Glove with Leather Back, Kevlar Lining and Impact Protection, Cut Level A3 - 1 Pair
Part# 10-KS12 Part# 10-KS18CL PIP 120-4150 Maximum Safety Reinforced Goatskin Leather Palm Glove with Leather Back, Kevlar Blended Lining and Impact Protection, Cut Level A3- 1 Pair

Ideal for heavy/light construction, auto repair, demolition, manufacturing, mining, fabrication, landscaping.

  • Reinforced Goatskin leather palm and back provides the softest, most abrasion-resistant leather and is highly recommended for applications requiring tactile sensitivity
  • Goatskin leather fingertips for added protection
  • Kevlar® blended lining offers comfort, enhanced cut protection and good heat dispersion
  • Internal foam padded palm absorbs and dampens shock
  • Thermo Plastic Rubber (TPR) molded finger and dorsal guards for maximum protection
  • Nylon spandex fabric for comfort and breathability
  • Reflective line on back of hand makes this product easy to see in low-light applications
  • PVC sandy grip on thumbcrotch and thumb provides an enhanced grip and extra cut/abrasion resistance
  • Micro cotton thumb for comfort
  • Slip-on cuff with hook & loop closure for easy on/off and a secure fit
  • Launderable for extended life and to reduce replacement costs
  • ANSI Cut Level A3
  • ANSI Abrasion Level A3
  • Available in Sizes: M - 3X

LINER MATERIAL: KEVLAR
Kevlar: DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar®licensed manufacturers.
PIP 10-KS12TO Kut-Gard Kevlar Sleeves, Two Ply, 12" Length, Thumb Hole - Box/6 Pairs PIP 10-KS14 Kut-Gard Kevlar Sleeves, Two Ply, 14" Length - Box/6 Pairs PIP 10-KS14TO Kut-Gard Kevlar Sleeves, Two Ply, 14" Length, Thumb Hole - Box/6 Pairs
Part# 10-KS12TO Part# 10-KS14 Part# 10-KS14TO
PIP 10-KS18 Kut-Gard Kevlar Sleeves, Two Ply, 18" Length - Box/6 Pairs West Chester 730T Taeki 5 Knit Glove Liner - Box/12 Pairs PIP 10-KS18TO Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Thumb Hole - Box/6 Pairs
Part# 10-KS18 Part# 730T Part# 10-KS18TO
PIP 10-KS18TT Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Thumb Tack - Box/6 Pairs West Chester 730TBN Taeki 5 Nitrile Dipped Glove - Box/12 Pairs PIP 10-KS18THV Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Thumb Hole, Adjustable - Box/6 Pairs
Part# 10-KS18TT Part# 730TBN Part# 10-KS18THV
West Chester 6100 Ironcat Metal Tamer High Dex TIG Welding & Cut Gloves, FR Silicone Coated, ANSI A3 Cut Level, Box/ 3 Pairs PIP 10-KS24 Kut-Gard Kevlar Sleeves, Two Ply, 24" Length - Box/6 Pairs PIP 10-KS24TO Kut-Gard Kevlar Sleeves, Two Ply, 24" Length, Thumb Hole - Box/6 Pairs
ANSI Cut Level A3 Part# 10-KS24 Part# 10-KS24TO
West Chester 730TGU Taeki 5 Polyurethane Dipped Glove - Box/12 Pairs Majestic 3227 Kevlar Glove, 13-Gauge Seamless Kevlar Liner with HCT Advanced Foam Nitrile Palm West Chester 730TBU Taeki 5â„¢ PU Dipped Glove - Box/12 Pairs
Part# 730TGU Kevlar Lined Cut Level 3 Part# 730TBU