Home > Glove Type > Cut Resistant
We found 109 results matching your criteria.
Sort By:
Page of 4
PIP 43-850L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner -32 oz, Uncoated, ANSI A4 Cut Level, Large - Box/12 Gloves PIP 22-900 Kut-Gard Choice Steel Core Gloves, Kut-Gard Choice, 7 Gauge, ANSI Cut Level 5 / A7, Box/ 12 Pairs West Chester KS993KOA Premium Grain Goatskin Drivers Gloves, Oil Armor Finish, Cut Level 4 Lining, Arc Flash 4 Rated, Pair
Part# 43-850L Part# 22-900 Arc Flash Rated / Cut Level A4
PIP 43-851L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner and Double-Sided SilaGrip Coating - 32 oz - Large - Box/12 Pairs PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair
Part# 43-851L

PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 Gauge Green High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger
  • Extended wrist
  • Velcro closure for easy on/off and a secure fit
  • ANSI A2 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 3
    - Tear: 4
    - Puncture: 3
  • Available in sizes: Small - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair

Ideal for petrochem , construction, demolition, mining, and fabrication.

  • Synthetic leather palm with silicone grip enhances grip in wet and dry applications while providing dexterity
  • Thermo Plastic Rubber (TPR) molded fingers, thumb and back of the hand guards for maximum protection
  • Kevlar® Stitched palm for added durability and gel padding for comfort
  • Synthetic Leather forchettes enhance the natural contour of the glove for a better fit
  • Kevlar® Fabric reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in high-wear areas
  • Hi-Vis Spandex fabric back
  • Glove pull with ID badge on wrist for ease of donning
  • Launderable for extended life and to reduce replacement costs
  • Fully lined with Kevlar® fabric for added heat and cut resistance
  • Water barrier membrane to keep your hands dry
  • EN 388 Results:
    - Abrasion: 3
    - Cut (Coupe Test): 3
    - Tear: 3
    - Puncture: 3
  • Available in sizes: Medium - 2XL

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP  Kut-Gard Brute Steel Core Gloves, Kut-Gard Brute, 7 Gauge, Stainless #22-780 PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair PIP 43-859L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner and Double-Sided SilaGrip Coating - Extended Cuff - Large - Box/ 6 Pairs

PIP Kut-Gard Brute Steel Core Gloves, Kut-Gard Brute, 7 Gauge, Stainless #22-780

Applications:
Ideal for food service applications, food processing, pulp and paper processing, plastic molding, glass and metal handling.

Features:

  • Seamless knit construction provides comfort, fit, and dexterity
  • Dyneema® blend enhances the gloves performance without sacrificing flexibility or dexterity and ensures maximum protection • Ambidextrous pattern permits glove to be worn on either hand, extending wear and reducing costs
  • Special non-latex cuff dramatically reduces cuff blowout, even after multiple launderings in bleach
  • Can be worn on its own or as a glove liner 
  • Good gripping properties 
  • Shrink resistant 
  • Made from component materials that comply with Federal Regulations for food contact 21 CFR, 170-199 
  • Antimicrobial gloves are non-toxic and non-corrosive and complies with FDA, EPA and USDA standards for food contact


Cut Resistant Properties

  • ASTM F2992-15 ANSI Cut Level A9 (Adopted by ANSI/ISEA 02/16)
  • ASTM F1790-05 ANSI Cut Level 5

PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 gauge orange HPPE shell with black micro-surface nitrile padded palm
  • High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger • Extended wrist • Velcro closure for easy on/off and a secure fit
  • ANSI A3 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 4
  • Available in sizes: Medium - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



Part# 43-859L
West Chester 87800 R2 Hi Vis Green Cotton Corded Palm Rigger Gloves, TPR Impact Protection, ANSI Cut Level A2 , Box/ 3 Pairs West Chester KS993KOAB Premium Grain Goatskin Drivers Gloves, Bumper Protection, Oil & Aqua Armor Finish, Cut Level A4, Arc Flash 4 Rated, Pair PIP 120-MP2415 Boss Synthetic Leather Palm High Performance Gloves, Silicone Grip, TPR Impact Protection, Cut Level A5, Abrasion A6, Pair
Cut Level A2 Arc Flash Rated / Cut Level A4

PIP 120-MP2415 Boss Synthetic Leather Palm High Performance Gloves, Silicone Grip, TPR Impact Protection, Cut Level A5, Abrasion A6, Pair

HAND PROTECTION - HIGH PERFORMANCE GLOVES - OIL & GAS GLOVES - BOSS ULTRA HIGH PERFORMANCE GLOVES

Ideal for petrochemical, heavy/light construction, auto repair, demolition, manufacturing and mining.
  • Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
  • Kevlar® fiber liner provides high tensile strength relative to its weight, is inherently cut resistant and will not melt, ignite or conduct electricity
  • PVC on palm, thumb crotch and fingertips provides an enhanced grip and extra cut/abrasion resistance
  • Silicone grip provides unparalleled grip in wet and oily conditions
  • Reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
  • Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
  • Stitched with Kevlar®, adding strength and burn resistance
  • Pre-curved fingers are ergonomic and offer all day comfort
  • Open cuff for easy donning and doffing
  • Available in sizes: Medium - 3XL

ANSI CUT LEVEL: A5
Test Method: ASTM F2992-15

ANSI IMPACT LEVEL: 2


EN 388 2016 Results:
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: Pass
LINER MATERIAL: KEVLAR
Kevlar: DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar® licensed manufacturers.
West Chester 9916 Premium Grain Goatskin Drivers Gloves, TPR Hi Vis Impact Protection, Cut Resistant A6, Pair West Chester 87020 R2 Rig Cat 2 Glove, Cut & Oil Resistant, PVC Palm, ANSI Cut Level A3, Pair Majestic A2P37Y PowerCut Alycore Armor Skin Cut & Puncture Resistant Gloves, Hi Vis Yellow Knit Back, ANSI 5 / A9 Cut Level, 1 Pair
Cut Level A7

West Chester 87020 R2 Rigger Glove with Cut Resistant PVC Palm, ANSI Cut Level 2, Pair

The RigCat 2 offers a revolutionary palm design specifically made to handle highly abrasive tasks. This industrial grade PVC palm with synthetic leather backing ensures the longevity of your glove and allows your hands to have the dexterity they need to remain productive throughout the entire task

Features
  • TPR finger, hand and knuckle guards to protect against bumps & bruises
  • Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar® reinforced thumb saddle
  • Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant & cut resistant PVC palm providing excellent grip in wet applications
  • ANSI cut level 2 ; EN 388: 3243
  • Kevlar thumb saddle increase product life
  • Colored bright red for easy signaling on the jobsite

Industries & Applications
Hazmat and Abatement, Construction, Oil and Gas, Manufacturing
 
Protection Need
Impact Resistant, Cut Resistant

Sizes
S, M, L, XL, 2 XL, 3 XL and higher

 

Part# A2P37Y -Hi Vis Yellow
PIP 20-DA Kut-Gard 2-Ply ACP / Dyneema Blended Cut Resistant Sleeve, 10" - 24" Length - Box/ 12 Sleeves Majestic A2B37B Power Cut with Alycore Gloves - 4 Layers in Palm - 2 Layers in Fingers - Black - 1 Pair PIP 16-150 G-Tek PolyKor Seamless Knit Blended Gloves, Polyurethane Coated Smooth Grip on Palm & Fingers, Cut Level A2,  Box/12 Pairs

PIP 20-DA Kut-Gard 2-Ply ACP / Dyneema Blended Cut Resistant Sleeve, 10" - 24" Length - Box/ 12 Sleeves

Sleeve ANSI Cut Level 4 / A4

Offers arm cut protection for applications that require large object handling, perfect for reach application protection. Ideal for food processing, electronics manufacturing, glass cutting, paper processing.

 

FEATURES

  • The proprietary ACP, Dyneema blend offers superior cut resistance, exceptional comfort and will not cause skin irritation
  • Superior washability, can be washed repeatedly in chlorine bleach and caustic detergents or can be dry-cleaned, shrink resistant
  • 100% latex and silicone-free
  • Meets FDA & USDA food handling requirements

 

Dyneema is 15 times stronger than steel on a weight for weight basis! It's a High Performance Polyethylene (HPPE) fiber made from Ultra-High Molecular Weight Polyethylene (UHMWPE). Dyneema® fiber is much thinner and more flexible than traditional materials, such as leather and cotton, while offering higher protection.

Made in the U.S.A., Kut Gard seamless knit gloves and sleeves are designed to provide the highest possible cut protection for the food industry.  Because they comply with both the US and Canadian standards for food contact, Kut Gard gloves and sleeves blended with antimicrobial fibers can be used for operations where direct, indirect, and incidental contact with food may occur.

Part# A2B37B 16-150, Cut Level 2
PIP 34-874 MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers - Box/12 Pairs PIP 07-K320 Kut-Gard Seamless Knit Kevlar® / Cotton Plated Glove - Medium Weight -  Box/12 Pairs West Chester 6100 Ironcat Metal Tamer High Dex TIG Welding & Cut Gloves, FR Silicone Coated, ANSI A3 Cut Level, Box/ 3 Pairs
MaxiFlex Ultimate by ATG Part# 07-K320 ANSI Cut Level A3
PIP 42-874 MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove with AD-APT Cooling Technology, Nitrile Coated MicroFoam Grip on Palm & Fingers- Box/12 Pairs West Chester 6144 Ironcat Premium Top Grain Kidskin TIG Welding Gloves, ANSI A4 Cut Level, Box/3 Pairs West Chester 710HGUB R2 Silver Fox Cut Resistant Gloves, 10 Gauge HPPE Shell, Gray PU Palm Coated, TPR Protection, Cut Level A6, 3 Pairs
MaxiFlex Ultimate Glove with AD-APT Cooling

West Chester 6144 Ironcat Premium Top Grain Kidskin TIG Welding Gloves, Box/3 Pairs

Ironcat Premium Top Grain Kidskin TIG Welding Glove, straight thumb, 4" cuff, Kevlar sewn, with an ANSI A4 cut lining.

Features
  • cut and sew lining offers cut and heat protection
  • Kevlar® thread protect seams from sparks
  • Cut and sew Kevlar and glass lining, ANSI A4 Cut Resistance
  • Soft leather for optimum dexterity and comfort

Protection Need: Heat Resistant, Flame Resistant, Cut Resistant




Cut Level A4
Majestic A4B37Y Power Cut with Alycore Gloves - 8 Layers on Palm - 4 Layers in Fingers - Hi Vis Yellow - 1 Pair PIP 34-874FY MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove, Nitrile Coated MicroFoam Grip on Palm & Fingers, Hi Vis Yellow - Box/12 Pairs PIP 16-350 G-Tek PolyKor Seamless Knit PolyKor Blended Glove with Nitrile Coated Micro-Surface Grip on Palm & Fingers - Box/12 Pairs
Part# A4B37Y MaxiFlex Ultimate by ATG Part# 16-350
PIP 16-560 G-Tek PolyKor Seamless Knit PolyKor Blended Glove with Polyurethane Coated - Box/12 Pairs PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs West Chester 2524KT Cut Resistant Sleeve 100% Kevlar, Two-Ply Tubular Knit Sleeve - With Thumb Slot - 24" - Box/12 Sleeves
Part# 16-560

PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Hi-Vis coloring makes this product very easy to see
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

Part# 2524KT