Home > Glove Type > Kevlar
We found 108 results matching your criteria.
Sort By:
Page of 4
PIP 43-850L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner -32 oz, Uncoated, ANSI A4 Cut Level, Large - Box/12 Gloves PIP 22-900 Kut-Gard Choice Steel Core Gloves, Kut-Gard Choice, 7 Gauge, ANSI Cut Level 5 / A7, Box/ 12 Pairs PIP 43-858L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner - Extended Cuff, ANSI Cut Level A4 - Large - Box/6 Pairs
Part# 43-850L Part# 22-900 Part# 43-858L
PIP 74-SC7104  Heavy Side Split Cowhide Foundry Glove with Thick Wool Liner and Kevlar Stitching - Leather Gauntlet Cuff  - Box/12 Pairs PIP 43-851L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner and Double-Sided SilaGrip Coating - 32 oz - Large - Box/12 Pairs PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Part# 74-SC7104 Part# 43-851L

PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 Gauge Green High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger
  • Extended wrist
  • Velcro closure for easy on/off and a secure fit
  • ANSI A2 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 3
    - Tear: 4
    - Puncture: 3
  • Available in sizes: Small - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair PIP  Kut-Gard Brute Steel Core Gloves, Kut-Gard Brute, 7 Gauge, Stainless #22-780 PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair

PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair

Ideal for petrochem , construction, demolition, mining, and fabrication.

  • Synthetic leather palm with silicone grip enhances grip in wet and dry applications while providing dexterity
  • Thermo Plastic Rubber (TPR) molded fingers, thumb and back of the hand guards for maximum protection
  • Kevlar® Stitched palm for added durability and gel padding for comfort
  • Synthetic Leather forchettes enhance the natural contour of the glove for a better fit
  • Kevlar® Fabric reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in high-wear areas
  • Hi-Vis Spandex fabric back
  • Glove pull with ID badge on wrist for ease of donning
  • Launderable for extended life and to reduce replacement costs
  • Fully lined with Kevlar® fabric for added heat and cut resistance
  • Water barrier membrane to keep your hands dry
  • EN 388 Results:
    - Abrasion: 3
    - Cut (Coupe Test): 3
    - Tear: 3
    - Puncture: 3
  • Available in sizes: Medium - 2XL

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP Kut-Gard Brute Steel Core Gloves, Kut-Gard Brute, 7 Gauge, Stainless #22-780

Applications:
Ideal for food service applications, food processing, pulp and paper processing, plastic molding, glass and metal handling.

Features:

  • Seamless knit construction provides comfort, fit, and dexterity
  • Dyneema® blend enhances the gloves performance without sacrificing flexibility or dexterity and ensures maximum protection • Ambidextrous pattern permits glove to be worn on either hand, extending wear and reducing costs
  • Special non-latex cuff dramatically reduces cuff blowout, even after multiple launderings in bleach
  • Can be worn on its own or as a glove liner 
  • Good gripping properties 
  • Shrink resistant 
  • Made from component materials that comply with Federal Regulations for food contact 21 CFR, 170-199 
  • Antimicrobial gloves are non-toxic and non-corrosive and complies with FDA, EPA and USDA standards for food contact


Cut Resistant Properties

  • ASTM F2992-15 ANSI Cut Level A9 (Adopted by ANSI/ISEA 02/16)
  • ASTM F1790-05 ANSI Cut Level 5

PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 gauge orange HPPE shell with black micro-surface nitrile padded palm
  • High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger • Extended wrist • Velcro closure for easy on/off and a secure fit
  • ANSI A3 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 4
  • Available in sizes: Medium - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 43-859L Kut-Gard Kevlar / Preox Seamless Knit Hot Mill Glove with Cotton Liner and Double-Sided SilaGrip Coating - Extended Cuff - Large - Box/ 6 Pairs PIP 10-KS12S Kut-Gard Kevlar Sleeves, Single Ply, 12" Length - Box/6 Pairs PIP 10-KS14S Kut-Gard Kevlar Sleeves, Single Ply, 14" Length - Box/6 Pairs
Part# 43-859L Part# 10-KS12S Part# 10-KS14S
PIP 10-KS14CL Kut-Gard Kevlar Sleeves, Two Ply, 14" Length, Cotton Inner Ply - Box/6 Pairs PIP 10-KS10 Kut-Gard Kevlar Sleeves, Two Ply, 10" Length - 6 Pairs PIP 10-KS18S Kut-Gard Kevlar Sleeves, Single Ply, 18" Length - Box/6 Pairs
Part# 10-KS14CL Part# 10-KS10 Part# 10-KS18S
West Chester 87020 R2 Rig Cat 2 Glove, Cut & Oil Resistant, PVC Palm, ANSI Cut Level A3, Pair PIP 10-KS18STO Kut-Gard Kevlar Sleeves, Single Ply, 18" Length, Thumb Hole - Box/6 Pairs PIP 10-KS10TO Kut-Gard Kevlar Sleeves, Two Ply, 10" Length, Thumb Hole - Box/6 Pairs

West Chester 87020 R2 Rigger Glove with Cut Resistant PVC Palm, ANSI Cut Level 2, Pair

The RigCat 2 offers a revolutionary palm design specifically made to handle highly abrasive tasks. This industrial grade PVC palm with synthetic leather backing ensures the longevity of your glove and allows your hands to have the dexterity they need to remain productive throughout the entire task

Features
  • TPR finger, hand and knuckle guards to protect against bumps & bruises
  • Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar® reinforced thumb saddle
  • Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant & cut resistant PVC palm providing excellent grip in wet applications
  • ANSI cut level 2 ; EN 388: 3243
  • Kevlar thumb saddle increase product life
  • Colored bright red for easy signaling on the jobsite

Industries & Applications
Hazmat and Abatement, Construction, Oil and Gas, Manufacturing
 
Protection Need
Impact Resistant, Cut Resistant

Sizes
S, M, L, XL, 2 XL, 3 XL and higher

 

Part# 10-KS18STO Part# 10-KS10TO
PIP 10-KS12 Kut-Gard Kevlar Sleeves, Two Ply, 12" Length - Box/6 Pairs West Chester 100% Kevlar, Two-Ply Tubular Knit Sleeve - No Thumb Slot PIP 10-KS18CL Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Cotton Inner Ply - Box/6 Pairs
Part# 10-KS12 10" Cut Resistant Sleeve Part# 10-KS18CL
PIP 10-KS12TO Kut-Gard Kevlar Sleeves, Two Ply, 12" Length, Thumb Hole - Box/6 Pairs PIP 10-KS14 Kut-Gard Kevlar Sleeves, Two Ply, 14" Length - Box/6 Pairs PIP 10-KS14TO Kut-Gard Kevlar Sleeves, Two Ply, 14" Length, Thumb Hole - Box/6 Pairs
Part# 10-KS12TO Part# 10-KS14 Part# 10-KS14TO
West Chester 35KE, Kevlar/Cotton Blend, Medium Weight Gloves PIP 10-KS18 Kut-Gard Kevlar Sleeves, Two Ply, 18" Length - Box/6 Pairs PIP 10-KS18TO Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Thumb Hole - Box/6 Pairs
Part# 35KE Part# 10-KS18 Part# 10-KS18TO
PIP 07-K320 Kut-Gard Seamless Knit Kevlar® / Cotton Plated Glove - Medium Weight -  Box/12 Pairs PIP 10-KS18TT Kut-Gard Kevlar Sleeves, Two Ply, 18" Length, Thumb Tack - Box/6 Pairs West Chester 993K, Select Grain Cowhide Palm & Fingers, Split Leather Back, Kevlar Sewn Leather Drivers Gloves
Part# 07-K320 Part# 10-KS18TT Part# 993K