Home > Glove Type > Polyurethane
We found 26 results matching your criteria.
Sort By:
Page of 1
PIP 33-125 G-Tek NP Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs PIP 33-B125 G-Tek GP Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs PIP 33-G125 G-Tek NPG Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs
Part# 33-125 Part# 33-B125 Part# 33-G125
West Chester HVY713SUTS Tacto Touch Screen Gloves, Gray PU Palm Coated, 13g Hi vis Yellow Nylon Shell - Box/12 Pairs PIP 33-825 G-Tek GP Medium Weight Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs PIP 33-425LY G-Tek GP Hi-Vis Seamless Knit Polyester Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs
Part# HVY713SUTS Part# 33-825 Part# 33-425LY
PIP 33-425OR G-Tek GP Hi-Vis Seamless Knit Polyester Glove with Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs PIP 33-325 G-Tek GP Heavy Weight Seamless Knit Nylon Glove with Extra Thick Polyurethane Coated Smooth Grip on Palm & Fingers - Box/12 Pairs West Chester 701CRPB, Zone Defense 15 Gauge Red Nylon Shell with Black Polyurethane Palm Coated, EN Level 1, ANSI 1, Box/ Dozen Pairs
Part# 33-425OR Part# 33-325 Part# 701CRPB
PIP 16-D622 G-Tek PolyKor Seamless Knit PolyKor Blended Glove with Polyurethane Coated - Box/12 Pairs PIP 16-150 G-Tek PolyKor Seamless Knit Blended Gloves, Polyurethane Coated Smooth Grip on Palm & Fingers, Cut Level A2,  Box/12 Pairs West Chester 730TBU Taeki 5â„¢ PU Dipped Glove - Box/12 Pairs
Part# 16-D622 16-150, Cut Level 2 Part# 730TBU
West Chester 703COPB Zone Defenseâ„¢ Orange HPPE Shell with Black Polyurethane Palm Coat - Box/12 Pairs West Chester 720DGU Gray PU Palm Coated Speckle Gray HPPE Gloves - Box/12 Pairs West Chester 720DWU White PU Palm Coated White HPPE Gloves - Box/12 Pairs
Part# 703COPB Part# 720DGU Part# 720DWU
Majestic 35-1305 Cut-Less Watchdog Gloves, HPPE 13 Gauge Seamless Knit, Polyurethane Palm Dipped, ANSI Cut Level 2, Box/12 Pairs PIP 16-530 G-Tek PolyKor Seamless Knit PolyKor Blended Glove with Polyurethane Coated - Box/12 Pairs West Chester 730TGU Taeki 5 Polyurethane Dipped Glove - Box/12 Pairs
Part# 35-1305 Part# 16-530 Part# 730TGU
PIP 16-560 G-Tek PolyKor Seamless Knit PolyKor Blended Glove with Polyurethane Coated - Box/12 Pairs PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs West Chester 705CGNF, Zone Defense 10 Gauge HPPE Glove, Green HPPE Shell with Black Nitrile Foam Palm Coated, EN Level 5, ANSI 3, Fiber 10 X Stronger than Steel, Box/Dozen Pairs
Part# 16-560

PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Hi-Vis coloring makes this product very easy to see
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

Part# 705CGNF
Majestic 37-1300 37-3435 Majestic 37-1505 Cut-Less Diamond Cut Resistant Gloves Made with Dyneema - Box/12 Pairs

Majestic 37-1300 Dyneema Cut-Less Diamond Cut Resistant Gloves, 18 Gauge, Polyurethane Palm Coated, ANSI Cut Level 2, Box/12 Pairs
ANSI 105-2016 Cut Resistance - ANSI Cut Level 2 / A2

  • Majestic gloves made with Dyneema® Diamond Technology offers the leading combination of cut protection, comfort and durability.
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the world’s strongest fiber.
  • Light knit high performance 3G12 made with Dyneema® Diamond Technology
  • Soft gray polyurethane palm coating for increased dexterity and grip in industrial applications
  • Long knit cuff for more secure fit and increased cut protection
  • Pre-curved finger design to minimize hand fatigue


Technical Specs

Material: 3G12 Dyneema® Diamond Technology /Spandex

Cuff Closure: Knit wrist

Coating: Polyurethane Knit

Gauge: 18-gauge

Sizes: S-XXL

37-1300 specs

Majestic 37-3435 Cut-Less Dyneema Diamond Cut Resistant Gloves, 13 Gauge Seamless Knit, Polyurethane Coated Palm, Box/12 Pairs

Item # 37-3435
Replaces Item # 3435

  • Majestic gloves made with Dyneema® Diamond Technology offers the leading combination of cut protection, comfort and durability
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the world's strongest fiber
  • Light knit high performance cut resistant material made with Dyneema® Diamond Technology
  • White polyurethane palm coating
  • Antimicrobial treated
  • Long knit cuff for more secure fit
  • Precurved finger design to minimize hand fatigue
  • 13-gauge
  • EN Cut Level 4
  • ANSI Cut Level A3
  • Available in sizes: Small - XXL
37-3435-cut level






Customer Testimonial:

Below is a testimonial from James, a metal worker in Oregon who has experienced first hand the cut resistant properties of the Majestic #3435 Dyneema glove. James clearly believes the glove saved his hand from serious injury and possible emergency treatment.


James writes...

“Using the Majestic cut-resistant gloves, I was breaking 14ga parts out of a 4' x 8' steel skeleton. This skeleton frame was extremely awkward to handle and the inside corners were unusually sharp. I was folding the skeleton in half to throw it away and part of it fell down onto the top of my left hand. Naturally my instinct was to pull my hand out but I wasn't fast enough. The sharp corner poked into my hand slightly and as I was pulling my hand out of the way it dragged across the top of my hand about four inches. I know from past experience, the weight of the skeleton and the sharpness of the corner that if I were wearing no gloves, or any other type of glove it would have cut deeply into my hand I would have had to have been rushed to the hospital. Instead there wasn't a mark on my hand and all I had to do was get a new glove and go back to work. I wish I had these gloves ten years ago when I started working with sheet metal".



Majestic 37-1505 Cut-Less Diamond Cut Resistant Gloves Made with Dyneema Polyurethane Palm Coating- Box/12 Pairs

NEW Item # 37-1505

Replaces Item # 34-1500 & Item # 34-1305

Features:

  • Majestic gloves made with Diamond Dyneema offers the leading combination of cut protection, comfort and durability.
  • ANSI Cut Level 4
  • At pound-for-pound fifteen times stronger than steel, Dyneema is the world's strongest fiber.
  • High performance 3G12 made with Diamond Dyneema
  • Gray polyurethane palm coating for industrial applications
  • Long knit cuff for more secure fit
  • Pre-curved finger design to minimize hand fatigue.
  • 13-gauge

Radians RWGD100 AXIS D2™ Cut Level A3 Touchscreen Work Glove, Dyneema® Diamond Technology, 15 Gauge Hi Vis Yellow Shell, PU Palm Coated, Box/12 Pairs PIP 19-D526B G-Tek 3GX Black Seamless Knit Dyneema Diamond Blended Glove, Polyurethane Coated Smooth Grip on Palm & Fingers , Touchscreen, ANSI Cut Level A4, Box/12 Pairs

Radians RWGD100 AXIS D2™ Cut Level A3 Touchscreen Work Glove, Dyneema® Diamond Technology, 15 Gauge Hi Vis Yellow Shell, PU Palm Coated, Box/12 Pairs
Applications: Automotive, Construction, Manufacturing, Metal Fabrication, Maintenance, Material Handling

The RWGD100, an Axis D2™ Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5.  The RWGD100 glove features a 15 gauge high visibility polyester shell with Dyneema® Diamond Technology and a black PU palm coating to provide significant protection against abrasion and cuts.

Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber.  Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection.

  • 15 gauge high visibility yellow polyester shell with Dyneema® Diamond Technology provides cut resistance.
  • Steel and fiberglass free.
  • Black PU palm coating provides excellent abrasion resistance.
  • Radiates heat away to help keep you cool.
  • Durable and washable for long lasting protection.
  • Seamless cuff design provides a comfortable fit.
  • ANSI Cut Level A3.
  • Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4).
  • Available in sizes:  Small - 2XL

Dyneema Logo


PIP 19-D526B G-Tek 3GX Black Seamless Knit Dyneema Diamond Blended Glove, Polyurethane Coated Smooth Grip on Palm & Fingers , Touchscreen, ANSI Cut Level A4, Box/12 Pairs

ANSI Cut 4 / A4: Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction and general duty.

  • Seamless construction offers increased comfort and breathability
  • Dyneema® shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
  • Black coloring hides the dirt better than lighter colored gloves
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • Sizes XS - 2XL
  • ANSI Cut 4 / A4
  • EN388 RESULTS: 4543CX
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 3
    - Cut (TDM-100 Test): C
    - Impact Protection: X (not tested)

Dyneema® Diamond Technology

With Dyneema® Diamond Technology cut resistance can be doubled compared to Dyneema® Continuous Filament Technology. The unmatched comfort level provides a cool, non-irritating sensation and feels like you are not even wearing gloves. But, the best feature of all, is the cost-effective and unmatched durability that stands up to laundering for long lasting value.

POLYURETHANE:

Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.