Home > Glove Type > Oil Rigger
We found 15 results matching your criteria.
Sort By:
Page of 1
West Chester KS993KOA Premium Grain Goatskin Drivers Gloves, Oil Armor Finish, Cut Level 4 Lining, Arc Flash 4 Rated, Pair PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair
Arc Flash Rated / Cut Level A4

PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 Gauge Green High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger
  • Extended wrist
  • Velcro closure for easy on/off and a secure fit
  • ANSI A2 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 3
    - Tear: 4
    - Puncture: 3
  • Available in sizes: Small - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair

Ideal for petrochem , construction, demolition, mining, and fabrication.

  • Synthetic leather palm with silicone grip enhances grip in wet and dry applications while providing dexterity
  • Thermo Plastic Rubber (TPR) molded fingers, thumb and back of the hand guards for maximum protection
  • Kevlar® Stitched palm for added durability and gel padding for comfort
  • Synthetic Leather forchettes enhance the natural contour of the glove for a better fit
  • Kevlar® Fabric reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in high-wear areas
  • Hi-Vis Spandex fabric back
  • Glove pull with ID badge on wrist for ease of donning
  • Launderable for extended life and to reduce replacement costs
  • Fully lined with Kevlar® fabric for added heat and cut resistance
  • Water barrier membrane to keep your hands dry
  • EN 388 Results:
    - Abrasion: 3
    - Cut (Coupe Test): 3
    - Tear: 3
    - Puncture: 3
  • Available in sizes: Medium - 2XL

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair West Chester 87800 R2 Hi Vis Green Cotton Corded Palm Rigger Gloves, TPR Impact Protection, ANSI Cut Level A2 , Box/ 3 Pairs West Chester KS993KOAB Premium Grain Goatskin Drivers Gloves, Bumper Protection, Oil & Aqua Armor Finish, Cut Level A4, Arc Flash 4 Rated, Pair

PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 gauge orange HPPE shell with black micro-surface nitrile padded palm
  • High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger • Extended wrist • Velcro closure for easy on/off and a secure fit
  • ANSI A3 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 4
  • Available in sizes: Medium - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



Cut Level A2 Arc Flash Rated / Cut Level A4
PIP 120-MP2415 Boss Synthetic Leather Palm High Performance Gloves, Silicone Grip, TPR Impact Protection, Cut Level A5, Abrasion A6, Pair West Chester 87020 R2 Rig Cat 2 Glove, Cut & Oil Resistant, PVC Palm, ANSI Cut Level A3, Pair West Chester 87811 Winter Fleece Lined R2 Safety Rugged Rigger Gloves, TPR Impact Resistance, Box/3 Pairs

PIP 120-MP2415 Boss Synthetic Leather Palm High Performance Gloves, Silicone Grip, TPR Impact Protection, Cut Level A5, Abrasion A6, Pair

HAND PROTECTION - HIGH PERFORMANCE GLOVES - OIL & GAS GLOVES - BOSS ULTRA HIGH PERFORMANCE GLOVES

Ideal for petrochemical, heavy/light construction, auto repair, demolition, manufacturing and mining.
  • Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
  • Kevlar® fiber liner provides high tensile strength relative to its weight, is inherently cut resistant and will not melt, ignite or conduct electricity
  • PVC on palm, thumb crotch and fingertips provides an enhanced grip and extra cut/abrasion resistance
  • Silicone grip provides unparalleled grip in wet and oily conditions
  • Reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
  • Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
  • Stitched with Kevlar®, adding strength and burn resistance
  • Pre-curved fingers are ergonomic and offer all day comfort
  • Open cuff for easy donning and doffing
  • Available in sizes: Medium - 3XL

ANSI CUT LEVEL: A5
Test Method: ASTM F2992-15

ANSI IMPACT LEVEL: 2


EN 388 2016 Results:
Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: Pass
LINER MATERIAL: KEVLAR
Kevlar: DuPont™ Kevlar® is light, comfortable and enduring protection against heat, cuts, lacerations and abrasions. Protective gloves and sleeves bearing this brand name provide assurance of compliance to strict performance and quality standards, and are produced only by Kevlar® licensed manufacturers.

West Chester 87020 R2 Rigger Glove with Cut Resistant PVC Palm, ANSI Cut Level 2, Pair

The RigCat 2 offers a revolutionary palm design specifically made to handle highly abrasive tasks. This industrial grade PVC palm with synthetic leather backing ensures the longevity of your glove and allows your hands to have the dexterity they need to remain productive throughout the entire task

Features
  • TPR finger, hand and knuckle guards to protect against bumps & bruises
  • Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar® reinforced thumb saddle
  • Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant & cut resistant PVC palm providing excellent grip in wet applications
  • ANSI cut level 2 ; EN 388: 3243
  • Kevlar thumb saddle increase product life
  • Colored bright red for easy signaling on the jobsite

Industries & Applications
Hazmat and Abatement, Construction, Oil and Gas, Manufacturing
 
Protection Need
Impact Resistant, Cut Resistant

Sizes
S, M, L, XL, 2 XL, 3 XL and higher

 

R2 Rugged Rigger Winter Lined
West Chester HVO1015 Air Krush Rough Grip PVC Interlock Lined 14" Gloves, Air Infused Foam Impact Protection, Chemical Resistant, Hi Vis Orange, Box/12 Pairs PIP 09-K3750 Maximum Safety AR/FR Top Grain Goatskin Leather Glove with Kevlar Liner - Straight Thumb - Box/12 Pairs Radians RWGD110 AXIS D2â„¢ Cut Resistant Gloves, Dyneema Diamond Technology, Cut Level A4, 13 Gauge Shell, Micro Nitrile Palm Coated, TPR Protection, Box/ 12 Pairs
Air Infused Foam Impact Protection Part# 09-K3750

Radians RWGD110 AXIS D2 Cut Resistant Gloves, Dyneema Diamond Technology, Cut Level A4, 13 Gauge Shell, Micro Nitrile Palm Coated, TPR Protection, Box/ 12 Pairs
Applications: Oil & Gas, Automotive, Construction, Manufacturing, Metal Fabrication, Maintenance, Material Handling

Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection.

The RWGD110, an Axis D2 Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The RWGD110 glove features a 13 gauge salt and pepper shell with Dyneema® Diamond Technology, TPR overlays and a black micro nitrile palm coating to provide significant protection against abrasion and cuts.


Features

  • 13 gauge salt and pepper shell with Dyneema® Diamond Technology provides cut resistance.
  • 725 Dtex Yarn.
  • TPR Overlays (U.S. Patent No. 9,241,519)- Impact & abrasion resistant
  • Steel and fiberglass free.
  • Reinforced Thumb Crotch.
  • Black micro nitrile palm coating provides excellent abrasion resistance.
  • Radiates heat away to help keep you cool.
  • Durable and washable for long lasting protection.
  • Seamless cuff design provides a comfortable fit.
  • ANSI Cut Level A4.
  • Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 5 4 4).


Dyneema Logo



hi vis
Majestic 21247HO Knucklehead X10 Mechanics Winter Glove, Armor Skin Leather Palm, Thinsulate Lined, Neoprene Padding, PVC Patches, Waterproof & Hydrocarbon Proof, Hi Vis Orange- Box/12 Pairs Majestic 21247HY Knucklehead X10 Mechanics Winter Glove Majestic 21267HO Hi Vis Knucklehead Driller X10 Gloves

Majestic 21247HO Knucklehead X10 Mechanics Winter Glove, Armor Skin Leather Palm, Thinsulate Lined, Neoprene Padding, PVC Patches, Waterproof & Hydrocarbon Proof, Hi Vis Orange- Box/12 Pairs
"King of the Oil & Gas Industry"

Knucklehead X10 features:

  • ARMOR SKIN Synthetic Leather Palm
  • PVC Anti-Slip Patches & Double Wish Bone Palm with Neoprene Padding for Impact Adsorption
  • Full Finger & Backhand Shock Absorbing Thermoplastic Rubber Protection
  • Water and Hydrocarbon proof: the 21243 has a breathable water proof bladder to provide comfort while protecting against water.
  • Contrasting High Visibility Materials
  • Pre-Curved Finger Design
  • Fully Sewn with High Tenacity Thread
  • Elastic Wrist
  • High Absorbency Terry Cloth Brow Wipe
  • Available in Sizes Small - XXXL
  • Sold by Box/ 1 Dozen Pairs

Grip: Double Wishbone PVC Palm
All Majestic Knucklehead X10 Gloves feature a double wishbone PVC palm that is triple sewn, increasing the
grip strength. The Majestic Knucklehead X10 has been tested and has a 21% increase in static coefficient of friction and 35% increase of kinetic COF over the Kong. Compared to the Roughneck the X10 is 53% and 50% respectively better in grip power.

Majestic 21247HY Knucklehead X10 Mechanics Winter Glove, Armor Skin Leather Palm, Thinsulate Lined, Neoprene Padding, PVC Patches, Waterproof & Hydrocarbon Proof, Hi Vis Yellow - Box/12 Pairs
"King of the Oil & Gas Industry"

Knucklehead X10 features:

  • ARMOR SKIN Synthetic Leather Palm
  • PVC Anti-Slip Patches & Double Wish Bone Palm with Neoprene Padding for Impact Adsorption
  • Full Finger & Backhand Shock Absorbing Thermoplastic Rubber Protection
  • Water and Hydrocarbon proof: the 21243 has a breathable water proof bladder to provide comfort while protecting against water.
  • Contrasting High Visibility Materials
  • Pre-Curved Finger Design
  • Fully Sewn with High Tenacity Thread
  • Elastic Wrist
  • High Absorbency Terry Cloth Brow Wipe
  • Available in Sizes Small - XXXL
  • Sold by Box/ 1 Dozen Pairs

Grip: Double Wishbone PVC Palm
All Majestic Knucklehead X10 Gloves feature a double wishbone PVC palm that is triple sewn, increasing the
grip strength. The Majestic Knucklehead X10 has been tested and has a 21% increase in static coefficient of friction and 35% increase of kinetic COF over the Kong. Compared to the Roughneck the X10 is 53% and 50% respectively better in grip power.

New Hi Vis Knucklehead Driller X10 Gloves