Home > Glove Type > Puncture Resistant
We found 27 results matching your criteria.
Sort By:
Page of 1
West Chester KS993KOA Premium Grain Goatskin Drivers Gloves, Oil Armor Finish, Cut Level 4 Lining, Arc Flash 4 Rated, Pair PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair
Arc Flash Rated / Cut Level A4

PIP 120-5130 Maximum Safety TuffMax3 Gloves, TPR Protection, ANSI Cut Level A2, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 Gauge Green High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger
  • Extended wrist
  • Velcro closure for easy on/off and a secure fit
  • ANSI A2 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 3
    - Tear: 4
    - Puncture: 3
  • Available in sizes: Small - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5275 Maximum Safety Roustabout KVW Oil & Gas Gloves, Heat & Cut Resistant Kevlar Lined, Impact Protection, Synthetic Leather Palm, Pair

Ideal for petrochem , construction, demolition, mining, and fabrication.

  • Synthetic leather palm with silicone grip enhances grip in wet and dry applications while providing dexterity
  • Thermo Plastic Rubber (TPR) molded fingers, thumb and back of the hand guards for maximum protection
  • Kevlar® Stitched palm for added durability and gel padding for comfort
  • Synthetic Leather forchettes enhance the natural contour of the glove for a better fit
  • Kevlar® Fabric reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in high-wear areas
  • Hi-Vis Spandex fabric back
  • Glove pull with ID badge on wrist for ease of donning
  • Launderable for extended life and to reduce replacement costs
  • Fully lined with Kevlar® fabric for added heat and cut resistance
  • Water barrier membrane to keep your hands dry
  • EN 388 Results:
    - Abrasion: 3
    - Cut (Coupe Test): 3
    - Tear: 3
    - Puncture: 3
  • Available in sizes: Medium - 2XL

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair West Chester KS993KOAB Premium Grain Goatskin Drivers Gloves, Bumper Protection, Oil & Aqua Armor Finish, Cut Level A4, Arc Flash 4 Rated, Pair West Chester 9916 Premium Grain Goatskin Drivers Gloves, TPR Hi Vis Impact Protection, Cut Resistant A6, Pair

PIP 120-5150 Maximum Safety TuffMax5 Gloves, TPR Protection, ANSI Cut Level A3, EN 388 Cut, Puncture & Tear Resistant, Pair
Oil & Gas Glove

Ideal for petrochem, construction, auto repair, demo, mining, and fabrication.
  • 13 gauge orange HPPE shell with black micro-surface nitrile padded palm
  • High performance polyethylene (HPPE) fiber shell is light-weight and provides excellent dexterity, tactile sensitivity and cut resistance
  • MicroSurface nitrile-coated padded palm for enhanced wet & dry grip
  • Thermoplastic rubber (TPR) molded finger, thumb and back of hand guards for maximum protection
  • Reinforced leather between thumb and index finger • Extended wrist • Velcro closure for easy on/off and a secure fit
  • ANSI A3 Cut Resistant -Test Method: ASTM F2992-15
  • EN 388 Results:
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 4
  • Available in sizes: Medium - XXL

CARE INSTRUCTIONS Hand wash only, do not bleach, hang dry.

The Maximum Safety® brand of Hi-Performance gloves was developed to provide the added protection needed that most gloves aren’t designed to provide. Depending on your needs, Maximum Safety® provides various solutions for impact protection, cold protection, heat protection, FR and AR protection, and more! Advancements in our design also provide ergonomic solutions that increase comfort while reducing hand fatigue. See other Maximum Safety Gloves



Arc Flash Rated / Cut Level A4 Cut Level A7
Majestic A2P10P Power Cut Top Grain Pigskin Drivers Gloves with Alycore  - 1 Pair Majestic A2P37Y PowerCut Alycore Armor Skin Cut & Puncture Resistant Gloves, Hi Vis Yellow Knit Back, ANSI 5 / A9 Cut Level, 1 Pair PIP 16-150 G-Tek PolyKor Seamless Knit Blended Gloves, Polyurethane Coated Smooth Grip on Palm & Fingers, Cut Level A2,  Box/12 Pairs
Part# A2P10P Part# A2P37Y -Hi Vis Yellow 16-150, Cut Level 2
PIP 34-874 MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers - Box/12 Pairs PIP 42-874 MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove with AD-APT Cooling Technology, Nitrile Coated MicroFoam Grip on Palm & Fingers- Box/12 Pairs Majestic A4B37Y Power Cut with Alycore Gloves - 8 Layers on Palm - 4 Layers in Fingers - Hi Vis Yellow - 1 Pair
MaxiFlex Ultimate by ATG MaxiFlex Ultimate Glove with AD-APT Cooling Part# A4B37Y
PIP 34-874FY MaxiFlex Ultimate Seamless Knit Nylon / Lycra Glove, Nitrile Coated MicroFoam Grip on Palm & Fingers, Hi Vis Yellow - Box/12 Pairs PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs PIP 16-665 G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip on Palm & Fingers, ANSI Cut Level A5, Box/ 12 Pairs
MaxiFlex Ultimate by ATG

PIP 16-645LG G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Hi-Vis coloring makes this product very easy to see
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

PIP 16-665 G-Tek PolyKor Cut Resistant Glove, Polyurethane Coated Smooth Grip on Palm & Fingers, ANSI Cut Level A5, Box/ 12 Pairs

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell with Aramid is lightweight, has excellent dexterity, tactile sensitivity and cut resistance while also providing protection in heat resistant applications, where sparks and minor flames are present
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL


The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves
PIP 07-TW600 Kut Gard Seamless Knit ACP / PolyKor Blended Glove with Polyester Lining - Heavy Weight, Cut Level A6, Box/ 12 Pairs PIP 16-635 G-Tek PolyKor Cut Resistant Glove, Nitrile Coated MicroSurface Grip on Palm & Fingers, ANSI Cut Level A5, Box/ 12 Pairs PIP 16-655 G-Tek PolyKor Cut Resistant Glove, Double-Dipped Nitrile Coated, MicroSurface Grip Palm & Fingers, ANSI Cut Level A5 , Box/ 12 Pairs

PIP 07-TW600 Kut Gard Seamless Knit ACP / PolyKor Blended Glove with Polyester Lining - Heavy Weight, Cut Level A6, Box/ 12 Pairs

Ideal for automotive manufacturing, metal fabrication, sheet metal fabrication, painting, canning, recycling, assembly, plastic molding, glass handing, pulp and paper processing, food processing, and metal stamping. DO NOT USE NEAR OPEN FLAME.

FEATURES

  • The proprietary PolyKor® blend provides exceptional cut resistance and overall performance
  • Seamless knit construction protects hands without sacrificing comfort or dexterity
  • ANSI Cut Level A6
  • Lighter and more flexible than comparable wire core gloves
  • Knit wrist provides a secure fit and helps prevent dirt and debris from entering the glove
  • Ambidextrous design allows replacing one glove at a time, rather than pairs
  • Dark color helps hides dirt and grime reducing the rate of disposal or laundering required saving money and extending the life of the glove
  • 100% silicone-free so it can be used in applications requiring a silicone-free environment
  • Good washability, keeps its stretch and recovery even after laundering
  • Color coded hems for easy size identification
  • Sizes: XSmall - XL

Kut Gard - Made in the U.S.A., Kut Gard® seamless knit gloves and sleeves are designed to provide the highest possible cut protection for the food industry. Because they comply with both the US and Canadian standards for food contact, Kut Gard® gloves and sleeves blended with antimicrobial fibers can be used for operations where direct, indirect, and incidental contact with food may occur.

LINER MATERIAL: ACP / POLYKOR

Proprietary ACP Technology raises the standards for performance knit products offering an increase in overall performance and value compared to traditional Para-Aramid products. ACP provides excellent abrasion and cut resistance for lower cost per use. ACP Technology gloves and sleeves are 100% silicone free. Products constructed with PolyKor® engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor® products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection.


Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

PIP 16-635 G-Tek PolyKor Cut Resistant Glove, Nitrile Coated MicroSurface Grip on Palm & Fingers, ANSI Cut Level A5, Box/ 12 Pairs

Ideal for electronics, glass cutting, sheet metal handling, general duty, parts assembly and sharp small parts handling.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Nitrile MicroSurface coated palm and fingertips provide a superior grip in dry, wet and oily conditions by reacting like tiny suction cups that attach themselves firmly to the material being handled
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

PIP 16-655 G-Tek PolyKor Cut Resistant Glove, Double-Dipped Nitrile Coated, MicroSurface Grip Palm & Fingers, ANSI Cut Level A5, Box/ 12 Pairs

Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction and other general duty applications.

  • 13 Gauge Seamless Knit construction offers increased comfort and breathability
  • PolyKor® blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Nitrile MicroSurface coated palm and fingertips provide a superior grip in dry, wet and oily conditions by reacting like tiny suction cups that attach themselves firmly to the material being handled
  • Double-Dipped palm and fingertips provides added abrasion resistance
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • ANSI Cut Level A5 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves
PIP 16-368 G-Tek PolyKor X7 Blended Glove, Seamless Knit, Neofoam Coated Palm & Fingers, Touchscreen Compatible, Cut Level A3, Box/ 12 Pairs Majestic 37-3436 Cut-Less Dyneema Diamond Cut Resistant Gloves, 13 Gauge Seamless Knit, Gray Polyurethane Coated Palm, Box/12 Pairs Majestic 37-343N Dyneema Cut-Less Diamond Cut Resistant Gloves

PIP 16-368 G-Tek PolyKor X7 Blended Glove, Seamless Knit, Neofoam Coated Palm & Fingers, Touchscreen Compatible, Cut Level A3, Box/ 12 Pairs

Applications: Finishing & inspection, Electronics, General duty, Small parts assembly, Construction, Maintenance

  • Seamless Knit - 18 gauge reinforced yarn provides durability & high cut resistance
  • Seamless construction offers increased comfort and breathability
  • PolyKor® blended shell with X7™ technology offers high cut resistance and durability with ultra-thin liners
  • NeoFoam® coated palm and fingertips offers great abrasion resistance and outstanding wet/dry grip
  • Reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
  • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • Meets EN 1149 for protective clothing electrostatic properties
  • ASTM F2992-15 ANSI Cut Level A3 (Adopted by ANSI/ISEA 02/16)
  • EN 388 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 1
  • Sizes: Small - 2XL


LINER MATERIAL: POLYKOR X7

X7™ Technology represents the latest in engineered yarn development. This super light-weight and thin, 18 gauge reinforced yarn provides very high cut resistance and durability by way of proprietary fibers. The result is exceptional cut resistance in a thin liner configuration.

COATING: NEOFOAM

Neofoam offers great abrasion resistance and outstanding wet/dry grip. It is highly flexible and tough, but still offers good breathability.


The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

Products constructed with PolyKor™ engineered yarn are suitable for protection against mechanical hazards in the toughest environments. PolyKor™ products can be designed for different protection levels, up to the highest levels, while maintaining an unprecedented level of comfort. They are also highly resistant to abrasion and chemicals, so you can rely on them to provide long-lasting protection. View other PolyKor Gloves

Majestic 37-3436 Cut-Less Dyneema Diamond Cut Resistant Gloves, 13 Gauge Seamless Knit, Gray Polyurethane Coated Palm, Box/12 Pairs

Item # 37-3436
Also available in 37-3435 & 37-343G

Replaces Item # 3435

  • Majestic gloves made with Diamond Dyneema® offers the leading combination of cut protection, comfort and durability.
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the worldÂ’s strongest fiber.
  • High performance 3G12 made with Diamond Dyneema®
  • Gray polyurethane palm coating
  • Long knit cuff for more secure fit
  • Pre-curved finger design to minimize hand fatigue.
  • 13-gauge
  • Available in sizes: Small - XXL
37-3435-cut level






Customer Testimonial:

Below is a testimonial from James, a metal worker in Oregon who has experienced first hand the cut resistant properties of the Majestic #3435 Dyneema glove. James clearly believes the glove saved his hand from serious injury and possible emergency treatment.


James writes...

 

“Using the Majestic cut-resistant gloves, I was breaking 14ga parts out of a 4’x 8’ steel skeleton. This skeleton frame was extremely awkward to handle and the inside corners were unusually sharp. I was folding the skeleton in half to throw it away and part of it fell down onto the top of my left hand. Naturally my instinct was to pull my hand out but I wasn’t fast enough. The sharp corner poked into my hand slightly and as I was pulling my hand out ofthe way it dragged across the top of my hand about four inches. I know from past experience, the weight of the skeleton and the sharpness of the corner that if I were wearing no gloves, or any other type of gloveit would have cut deeply into my hand I would have had to have been rushed to the hospital. Instead there wasn’t a mark on my hand and allI had to do was get a new glove and go back to work. I wish I had these gloves ten years ago when I started working with sheet metal.”





Majestic 37-343N Dyneema Cut-Less Diamond Cut Resistant Gloves, 13 Gauge Knit, White Polyurethane Palm Coated, ANSI Cut Level 3, Box/12 Pairs

Item # 37-343N
Replaces # 3435N

  • Majestic gloves made with Dyneema® Diamond Technology offers the leading combination of cut protection, comfort and durability.
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the world’s strongest fiber.
  • Heavier knit high performance 3G12 made with Dyneema® Diamond Technology
  • White polyurethane palm coating
  • Long knit cuff for more secure fit and increased cut protection
  • Pre-curved finger design to minimize hand fatigue


Technical Specs

Material: 3G12 Dyneema® Diamond Technology /Spandex

Cuff Closure: Knit wrist

Coating: Polyurethane Knit

Gauge: 13gauge

Sizes: S-XXL

37-343G



Majestic 37-343G  Dyneema Cut-Less Diamond Cut Resistant Gloves, 13 Gauge Knit, Polyurethane Palm Coated, ANSI Cut Level 3, Box/12 Pairs Majestic 37-3565 Dyneema Cut-Less Diamond Cut Resistant Gloves, 15 Gauge Seamless Knit, Foam Nitrile Coated Palm, ANSI Cut Level 3, Black, Box/12 Pairs PIP 19-D526B G-Tek 3GX Black Seamless Knit Dyneema Diamond Blended Glove, Polyurethane Coated Smooth Grip on Palm & Fingers , Touchscreen, ANSI Cut Level A4, Box/12 Pairs

Majestic 37-343G Dyneema Cut-Less Diamond Cut Resistant Gloves, 13 Gauge Knit, Polyurethane Palm Coated, ANSI Cut Level 3, Box/12 Pairs

  • Majestic gloves made with Dyneema® Diamond Technology offers the leading combination of cut protection, comfort and durability.
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the world’s strongest fiber.
  • Light knit high performance 3G12 made with Dyneema® Diamond Technology
  • Soft gray polyurethane palm coating for increased dexterity and grip in industrial applications
  • Long knit cuff for more secure fit and increased cut protection
  • Pre-curved finger design to minimize hand fatigue


Technical Specs

Material: 3G12 Dyneema® Diamond Technology /Spandex

Cuff Closure: Knit wrist

Coating: Polyurethane Knit

Gauge: 13gauge

Sizes: S-XXL

37-343G



Majestic 37-3565 Dyneema Cut-Less Diamond Cut Resistant Gloves, 15 Gauge Seamless Knit, Foam Nitrile Coated Palm, ANSI Cut Level A3, Black, Box/12 Pairs

  • Majestic gloves made with Dyneema® Diamond Technology offers the leading combination of cut protection, comfort and durability.
  • At pound-for-pound fifteen times stronger than steel, Dyneema® is the world’s strongest fiber
  • Light knit high performance material
  • Innovated for heavy-duty performance & enhanced comfort
  • Exceptional micro foam black nitrile palm coating offers 360º of breathability and increases dexterity & grip in industrial applications with touch-screen capabilities
  • Reinforced flat nitrile thumb crotch to extend the life of the glove
  • Enhanced dirt masking properties & washable, maximizing cost efficiency
  • Diffuses heat away from hands, keeping hands cool
  • Long knit cuff for more secure fit and increased cut protection
  • Pre-curved finger design to minimize hand fatigue
  • EN Cut Level 5
  • ANSI Cut Level A3
  • 15-gauge
  • Available in sizes: Small - XXL
Performance EN 388: 4541
- Abrasion:4
- Cut: 5
- Tear: 4
- Puncture: 1



PIP 19-D526B G-Tek 3GX Black Seamless Knit Dyneema Diamond Blended Glove, Polyurethane Coated Smooth Grip on Palm & Fingers , Touchscreen, ANSI Cut Level A4, Box/12 Pairs

ANSI Cut 4 / A4: Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction and general duty.

  • Seamless construction offers increased comfort and breathability
  • Dyneema® shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
  • Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip
  • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
  • Black coloring hides the dirt better than lighter colored gloves
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • Sizes XS - 2XL
  • ANSI Cut 4 / A4
  • EN388 RESULTS: 4543CX
    - Abrasion: 4
    - Cut (Coupe Test): 5
    - Tear: 4
    - Puncture: 3
    - Cut (TDM-100 Test): C
    - Impact Protection: X (not tested)

Dyneema® Diamond Technology

With Dyneema® Diamond Technology cut resistance can be doubled compared to Dyneema® Continuous Filament Technology. The unmatched comfort level provides a cool, non-irritating sensation and feels like you are not even wearing gloves. But, the best feature of all, is the cost-effective and unmatched durability that stands up to laundering for long lasting value.

POLYURETHANE:

Offers good abrasion resistance and dry grip, and fair grip in slightly wet conditions. PU properties allow for a very thin coating, which results in excellent tactility and dexterity.

PIP 16-377 G-Tek PolyKor X7 Cut Resistant Gloves, ANSI Cut Level A7, Puncture Resistant, FDA Compliant, Touch Screen Compatible, Box/ !2 Pairs Majestic 35-5575 Majestic 35-557Y Knucklehead X-15 Cut Resistant Gloves, Double Sandy Nitrile Palm Coating, Water & Oil Proof, Impact Resistant, ANSI Cut Level 4, Box/12 Pairs

PIP 16-377 G-Tek PolyKor X7 Cut Resistant Gloves, ANSI Cut Level A7, Puncture Resistant, FDA Compliant, Touch Screen Compatible, Box/ 12 Pairs

Ideal for use with electronics, glass cutting, metal handling, fastening and construction.

  • 18 gauge seamless construction offers increased comfort and breathability
  • PolyKor® blended shell with X7™ technology offers very high cut resistance and durability with ultra-thin liners
  • NeoFoam® coated palm and fingertips offers great abrasion resistance and outstanding wet/dry grip
  • Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
  • Knit Wrist helps prevent dirt and debris from entering the glove
  • Color coded hems for easy size identification
  • Washable, resistant to chemicals, water, and ultraviolet light
  • Compliant with FDA Part 177 - Indirect food activities: Polymers. Subpart C - • Substances for use only as components of articles intended for repeated use. Sec. 177.2600
  • Complies with FDA food handling requirements 21 CFR, Part 177
  • ANSI Cut Level A7 - Test Method: ASTM F2992-15
  • EN 388 2016 Results:
    - Abrasion: 4
    - Tear: 4
    - Puncture: 2
  • Sizes: Small - 2XL
The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards. View other GTek Gloves

What is X7™ Technology? PIP’s G-Tek® PolyKor® with X7™ Technology represents the latest in engineered yarn development. This super light-weight and thin, 18 gauge reinforced yarn provides very high cut resistance and durability by way of proprietary fibers. The result is exceptional cut resistance in a thin liner configuration.


Part# 35-5575 Part# 35-557Y