*$75 Minimum Order Required*
FREE SHIPPING On Orders $149+
Use Coupon Code: FREESHIP
*Restrictions Apply

Todol DF01 Duo-Fill 400 Professional Two-Part Expanding Straw Foam, 15/case

  • Todol DF01 Duo-Fill 400 Professional Two-Part Expanding Straw Foam, 15/case
Todol DF01 Duo-Fill 400 Professional Two-Part Expanding Straw Foam, 15/case

Todol DF01 Duo-Fill 400 Professional Two-Part Expanding Straw Foam, 15/case

Cures in Seconds


Free Shipping on $149 or More!


Please call for 25 Case + Pricing

Be the first to review this product

Case of 15 Cans
$513.75
  • 6+ $489.68
Todol DF01 Duo-Fill 400 Professional Two-Part Expanding Straw Foam, 15/case

Duo-Fill 400 two-part foam cures in seconds and stops leaks that fast so your personnel can Get to Work!!!

The Duo-Fill 400 can is a technically advance system that mixes as it comes out of the straw.
 
Fast curing, it stops flowing water. Perfect for flowing water. Perfect for utilities and utility contractors. Saves labor and time.
 

Benefits

  • Labor Savings
  • Stops Flowing Water
  • Fast Cure
  • Full Cross Sectional Curing
 

Features

  • Long Rigid Dispensing Tubes
  • Chemical Cure
  • Color Quality Curing
 

Highlights

  • 600 Cubic Inches
  • 13 oz. Can
  • 15 Cans Per Case
  • 30 9" Acuators Packaged Per Case
Tech Specs

IMPORTANT: PLEASE READ FOR BEST RESULTS

ONCE A CAN IS ON THE GUN, ALWAYS LEAVE A CAN ON THE GUN

This will assure no moisture from entering the system to clog up the gun.

SHAKE THE CAN WELL

This will mix the propellant and resin for a better cell structure.

CAN TEMPERATURE SHOULD BE OVER 60º F

This will assure optimum performance and highest volume. In cold temp, warm the can before foaming.

MIST THE SURFACE WITH WATER BEFORE FOAMING

Pur Fill is a moisture curing foam. This water will assure complete cross section curing.

TIGHTEN SET SCREW WHEN FOAMING IS ENDED

This will assure no accidental misfiring if the trigger bumps into anything.

USE SOLVENT CLEANER ONLY WHEN NECESSARY

Solvent cleaner will break down to resin and coat the inside of the gun. Best maintenance is ALWAYS LEAVE A CAN ON THE GUN.

THESE TIPS SHOULD EXTEND THE LIFE OF THE GUN.

PLEASE TRAIN EVERYONE THAT USES THE SYSTEM BECAUSE IF THEY LEAVE THE

CAN OFF THE GUN FOR MORE THAN 15 MINUTES THERE WILL BE DAMAGE TO THE GUN.

HAPPY FOAMING!!!!

You may also be interested in the following products