Sprayon LU200 Dry Film Moly Lubricant S00200000 Aerosol 11 Oz. Cans, Case/12
Sprayon® LU200 Dry Film Moly Lubricant Aerosol is a high solids, molybdenum disulfide coating that withstands high pressures. This non-conductive lubricant bonds to all clean surfaces that are not adversely affected by alcohol or aromatic hydrocarbons (toluene or xylene) resulting in a high performance dry film lubricant.
Also available in the following containers/formulations: Sprayon® LU200 Dry Film Moly Lubricant Bulk
- Withstands Extreme Pressures Up To 50,000 PSI
- Low Coefficient Of Friction
Uses: Assembly & run-in lubrication, gaskets, machine tool sliding surfaces & gears, tumbler locks, intricate mechanisms, chutes & bins, bearings, chain drives, intricate mechanisms, and more.
% VOC = 0.673%
Coefficient of Friction = 0.23
Color = Black
Consistency = Liquid
Contains P.T.F.E. = No
Corrosion Inhibitor = Pass
Dry Lubricant = Yes
Dry to Handle - High = 10 Minutes
Dry to Handle - Low = 10 Minutes
Dry to Touch - High = 5 Minutes
Dry to Touch - Low = 5 Minutes
Evaporation Rate = Fast
Flammable = Yes
Flashpoint = <0°F
Food Grade NSF Rating = H2
HAPS = No
High Heat Lubricant = Yes
High Performance Lubricant = Yes
HMIS Rating = 2,4,0
Load Capacity = Extreme Pressure
Moly Lubricant = Yes
NSF Rating Registration Number = 131583
Plastic Safe = No
Propellant = Hydrocarbon
SARA 313 = No
Scent = Mild Solvent
Specific Gravity = 0.71
Spray Pattern = Danvern
Temp High = 650°F
Temp Low = -30°F
Viscosity (Centistokes) = Low
VOC COMPLIANT - OTC = Yes
Weight / Gallon = 5.69
- Maximum performance is achieved when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale.
- Product should be sprayed in a well ventilated area.
- Sprays best at room temperature.
- Shake well before using.
- Spray at a distance of 8” to 10” from surface.