Sprayon MR351 Mold Cleaner S00351000, Aerosol 16 Oz.Cans, Case/12
Mold Cleaner and Inhibitor is a non-abrasive cleaner for all types of metal molds that also leaves a fine, microscopic inhibitor for short-term protection against corrosion. Surface moisture, dirt, oils, release agent residues and other contaminants are quickly eliminated without the necessity of removing the mold from the machine.
Uses: Metal molds, machinery, electrical and electronic equipment, pins, mechanical equipment
- Neutralizes Fingerprints
- Equipped with SPRAY ANYWAYValve
- Removes Resin Residual, Oils and Grease Deposites
Extend InfoInstructions for Use:
- Product should be sprayed in a well ventilated area.
- Sprays best at room temperature (70°F).
- Shake well before using.
- Hold can 8” to 10” from surface to be cleaned.
- Beginning at the top of the mold, use spray pressure to thoroughly wet surface.
- Wipe surface with a clean cloth to remove contaminants.
- Repeat application if needed.
- To use entire contents, hold sprayhead, then rotate can until material sprays.
- To provide extended protection against acid, humidity rust and contamination during indoor or outdoor storage, use Sprayon Mold Saver, item #S00361.