*$75 Minimum Order Required*
FREE SHIPPING On Orders $149+
Use Coupon Code: FREESHIP
*Restrictions Apply

Sprayon S00915000 Methylene Chloride Free Paint Remover SP 915

  • Sprayon S00915000 Methylene Chloride Free Paint Remover SP 915
Sprayon S00915000 Methylene Chloride Free Paint Remover

Sprayon S00915000 Methylene Chloride Free Paint Remover SP 915

PLEASE READ - Sprayon $425 Minimum Order Policy Before Proceeding to Checkout (Click Here)

Sprayon Logo

Please Call 931-651-1044 for Large Volume Custom Quote!

In addition to  FREE Freight, ALL Sprayon orders exceeding $1,500 receive 10% off at Checkout!

Free Shipping on $149 or More!

Free Shipping on Orders of $149+
Use Coupon Code FREESHIP at Checkout

**PLEASE READ the Sprayon Minimum Order Policy & Check the Box Below.  The Box MUST BE CHECKED in Order to Add an Item to the Cart**

Be the first to review this product

Pricing Per Case!

* Required Fields

Sprayon Methylene Chloride Free Paint Remover
Item # S00915000      SP 915

Sprayon® SP™ 915 Methylene Chloride Free Paint Remover has been developed for use in the removal of coatings, varnishes, epoxies and urethanes. The unique surfactant/solvent system allows for rapid penetration and removal of many common coatings. SP™ 915 Methylene Chloride Free Paint Remover's formulation does not contain Methylene Chloride.

Uses:  metal, stone, wood , brick, glass, ceramic tile, concrete, road signs, trucks, bridges, washroom walls

  • Fast Penetration
  • Cuts Through All Paint Finishes, Urethanes, Varnishes and Shellacs
  • Leaves Surface Clean and Ready to Repaint
  • Methylene Chloride Free- No Chlorinated Solvents, Caustics, or Acids

Performance Properties-

Specific Gravity: 0.8
Plastic Safe: N
Percent VOC: 48.4
VOC Compliant (CA and OTC States): Y
Flash Point: <0
Flammable: Y
HMIS: 3,4,0
Fill Weight: 16
Size UOM: oz
Activities: 62
Can Type: Aerosol

Extend Info
Instructions for Use:

  • Use in a well ventilated area.
  • Shake can for 1 minute.
  • Protect surrounding areas from overspray.
  • Wear rubber gloves, face & eye protection.
  • Spray heavy coat with a steady back and forth motion keeping spray upright 8-10” from surface.
  • Allow product to penetrate into paint finish or gasket cement.
  • WATCH for the following:
    -SOFTENING: Approximately 10 minutes.
    -BLISTERING: Approximately 20-30 minutes.
  • A second application might be necessary.
  • When chemical action is complete, scrape off with flexible putty knife or squeegee.
  • Rinse thoroughly with solvent or water wash.
  • Allow surface to dry completely before applying a new finish.
  • Prime metal as soon as possible to prevent rust.
  • For best results, use at room temperature (70°F-90°F).

You may also be interested in the following products