Home > Sealants > Adhesives, Caulks & Sealants >

Titebond 1413 Ultimate Wood Glue - Titebond III, 8 oz, Case/ 12

Titebond 1413 Ultimate Wood Glue - Titebond III, 8 oz, Case/ 12
Titebond Ultimate Wood Glue - Titebond III
 
Alternative Views:


Titebond logo

***COVID-19 NOTICE- RAW MATERIALS SUPPLY DELAYS***
Please Be Advised: All Titebond Products have been affected by the delay of raw materials for manufacturing.

ETA for All Titebond Orders is 8 - 10 Weeks

Our Price: $87.49
Custom Field 4: 1413

Stock Status:(Out of Stock)

Product Code: 1413
Qty:

Description
 
Titebond Ultimate Wood Glue - Titebond III
#1413 8oz. 12/case

Other Available Sizes

1412 4oz. 12/case
1414 16oz. 12/case
1415 Quart 6/case
1416 Gallon 2/case
1417 5 Gal Pail
1418 55 Gal Drum


Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.

Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

Physical Properties (Typical)
Type: Advanced Proprietary Polymer Calculated VOC: 5.6 g/L
State Liquid Weight/gallon9.22 lbs
Color: Tan Chalk temperature*Approx. 47°F
Dried filmLight brown Flashpoint>200°F.
Solids52% Freeze/thaw stabilityStable
Viscosity4,200 cps pH2.5
Storage life12 months in tightly closed containers below 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Application Guidelines Application temperature Above 47°F.
Open assembly time 10 minutes (70°F./50%RH)
Total assembly time 20-25minutes (70°F./50%RH)
Minimum required spreadApproximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Bond Strength ASTM D-905
(On Hard Maple)
Temperature Strength psi % Wood Failure
Room Temperature 4000 57
Features
  • Passes ANSI/HPVA Type I water-resistance
    Waterproof formula that cleans up with water
    Superior strength - Strong initial tack
    Designed for interior and exterior applications
    Longer open assembly time
    Lower application temperature
    Unaffected by finishes
    FDA approved for indirect food contact

Share your knowledge of this product. Be the first to write a review »