Home >

Titebond WeatherMaster Sealants - 45501 Off White

Titebond WeatherMaster Sealants - 45501 Off White

Sold by the Case
10.1 oz. Plastic Tube, 12/case

Minimum Purchase - 2 Cases of any Titebond Product

LEED Certified

Please Be Advised: All Titebond Products have been affected by the delay of raw materials for manufacturing.

ETA for All Titebond Orders is 8 - 10 Weeks

Our Price: $81.89
Custom Field 4: 45501

Stock Status:(Out of Stock)

Product Code: 45501

Titebond WeatherMaster White, Black & Clear Sealant
White, Black & Clear Colors to Choose From

Titebond WeatherMaster Sealant has been specifically formulated to outperform all othersealant technologies, including silicones and urethanes. This superiorpolymer formula provides the best possible performance on siding,windows, doors, roofs and vents. In addition to offering exceptionalflexibility, it provides unbeatable adhesion to wood, fiberboard,vinyl, aluminum, metal, brass and other common building materials.

WeatherMasterSealant is available in over 200 colors, all of which match today’spopular siding colors, regardless of the material or manufacturer. Iftouch-ups are necessary, it is paintable in less than one hour afterapplication.* It is waterproof, extrudes in extreme weather conditionsand is UV-resistant, making it the ideal choice for exteriorapplications. Safety is not compromised, as this sealant contains no solvents or isocyanates and is VOC-compliant.

Type Advanced polymer (reactive) Weight/gallon 8.68 - 12.5 lbs.
State Medium-viscosity caulk Flashpoint> 200°F.
Color Over 200 colors Freeze/thaw stability Stable
Solids 99% (96% Translucent) Viscosity 450,000 - 550,000 cps
Calculated VOC (less water):
9 g/L (<3% wt.) colors, 11 g/L (<3% wt.) Crystal
Storage life12 months in tightly closed containers at 75°F.

Application temperature Above 0°F.
Service temperatures -75°F. to 300°F.
Method of application Cartridge/caulking gun
Coverage (maximum)Approximate length of bead according to bead diameter:


1/4" bead3/8" bead1/2" bead
10.1 oz. Cartridge 31 ft. 13.5 ft. 7.5 ft.

Tooling time For a 1/4" bead, approximately 20-40 minutes, depending on temperature and humidity.
Working surfaces Surfacesmust be clean down to the original substrate and free from any materialthat may deter adhesion. It is the sole responsibility of the user tothoroughly test any proposed use with all substrates to determineproject suitability prior to using product on your application. Toensure neat sealant lines, mask areas adjacent to joints. Always applysealant in a bead form. Do not smear or wipe sealant to a thinconsistency outside of joint or masked area. Once sealant is dry to thetouch and does not transfer, remove masking tape. Must be painted witha water-based (latex-based) paint when used indoors.

Air,caulk and surface temperature should be above 0°F. WeatherMaster may bepainted anytime after one hour with water-based paint.* For other typesof paints, we recommend a compatibility test. If joint depth exceeds5/16", use backing material. Not designed for continuous submersion oruse below the waterline
  • Outperforms silicone, tripolymer and polyurethane sealants

  • Superior polymer technology

  • Applies easily in extreme weather conditions

  • Fills gaps up to 1 inch wide

  • Permanently flexible and watertight seal

  • UV-resistant

  • VOC-compliant

  • Can be painted with water-based paint anytime after one hour after application*

  • Passes ASTM C920, Type S, Grade NS, Class 25, Use NT, M, G and A

  • Passes Federal Specification TT-S-00230C, Type II, Class A

  • Passes CAN/CGSB-19 13-M87, Classification MCG-2-25-A-N, No.81026

  • USDA approved for use in meat and poultry areas

  • Passes ASTM C719, ASTM D412, ASTM C661, ASTM C679 and ASTM C510

  • AAMA 808.3-92 Exterior Perimeter

Share your knowledge of this product. Be the first to write a review »